Questions tagged [load-testing]
A load test is a type of performance test "focused on determining or validating performance characteristics of the product under test when subjected to workload models and load volumes anticipated during production operations". For issues relating to the setting up or running of load tests.
42
questions with no upvoted or accepted answers
7
votes
1
answer
2k
views
How to deserialize and correlate Binary Large Objects in Load Runner 11.5 Web Custom Request?
I'm working on a Silverlight based application. We've recorded the scripts using Load Runner 11.5 and while replaying to find dynamic values for correlation, we found out that the entire data in a ...
3
votes
1
answer
142
views
How to monitor the response time of page level individual elements of web page using RPT?
I want to measure the response time of the page level elements of a web page during load testing using IBM Rational Performance Tester.
For example, suppose I have clicked a submit button after ...
- 494
2
votes
1
answer
370
views
Apply a radom pacing in Jmeter without using Timers
I wanted to apply Pacing in jmeter for 120- 180 Seconds for all my samplers , I know i can do it with Through put Timers is there anyother way to apply pacing , i think we can use Beanshell Scripting ...
2
votes
0
answers
71
views
Design Industrial Process Controller for Testability
We are currently developing a new industrial process controller for applications with very low cycle times (<50us). The embedded software that runs on this controller shall be validated ...
- 121
2
votes
0
answers
806
views
How can I simulate the connection of multiple devices at once?
I have a client that's developing a system that allows any user within range to connect and use the service. A router will be on-site and allow anybody within range to connect via WiFi. A virtual "...
- 143
2
votes
0
answers
571
views
How to monitor JBoss active threads of a web application via JMeter
I have a requirement to monitor JBoss active threads (of an application under test) while I am performing load test through JMeter.
After going through different articles, I came across 2 JMeter ...
- 843
1
vote
2
answers
431
views
Jmeter Scenario: Users Login once - pause until all logged in and execute process (based on iterations not time) - processes complete users log out
I'm relatively new to Jmeter, but I have a scenario, that I've not been able to figure out where I need to perform the following:
All user log in to application with a ramp-up period of 15 seconds ...
1
vote
0
answers
1k
views
JMeter - 403 forbidden response
I have URL: http://******-********-management.*********.net.s3-website-**-northeast-1.amazonaws.com/session/signin.
I have created HTTP request sampler and my test plan looks like:
Before sign-in ...
- 43
1
vote
3
answers
6k
views
How to verify missing requests are sent from JMeter server
I'm running a test from JMeter sending HTTPS requests to a load balancer that is then distributing the user load across multiple application servers. We have an instance where as the load grows we are ...
- 57
1
vote
1
answer
782
views
Having issues with Jmeter Login Test keep on failing
I am trying to learn the Jmeter and performing simple login test for a test website. but I am keep on getting following error,
Thread Name: Thread Group 1-1
Sample Start: 2019-09-05 18:56:28 NZST
Load ...
- 11
1
vote
2
answers
2k
views
I am getting NET::ERR_CERT_AUTHORITY_INVALID when try to record script from JMeter
I setup the same proxy setting in my browser setting as in the JMeter. I tried to record some other website with same settings and they recorded successfully.
Following is the screenshot of the ...
- 11
1
vote
0
answers
29
views
Use variable in Graph Title
I wanna include count of threads in the Graph Title like this :
Now, this is just text ${__threadNum}, but I want to set value depend the current Number of Threads. Is that possible ?
- 121
1
vote
2
answers
101
views
There is any play/App store app available that only give the performance of specified of app?
Can we do manually performance testing for mobile application? There is any play/App store app available that only give the performance of specified of app. So that we can record the performance of ...
- 552
1
vote
0
answers
35
views
Can we create a load test having different geographies user with Cloud-based load testing?
I need to create a load test which should have users from USA , japan and few more countries.
Can I have a single loadtest where I can specify % number of user like
USA -80% , JAPAN - 10% ,France -...
- 11
1
vote
1
answer
90
views
Understanding results of the cloud based load test in VSTS
As part of load testing I ran the set of same API's for several iterations with different user loads. My concern is with the total requests made against the user load. All tests were ran for 10 ...
- 11
1
vote
1
answer
1k
views
How to use __iterationNum() custom function in JMeter to assign csv file to Http Request
Here I'm assigning CSV file on the basis of loop count so that done by using __iterationNum() JMeter custom function (custom JMeter Function plugin added to JMeter) But this stuff is not working for ...
- 119
1
vote
0
answers
308
views
Jmeter - What is the functioning of "Per User" checkbox under Throughput Controller?
I need to divide the load on my application with some percentages i.e. Login Module - 60%, Accounts - 10%, Other Modules - 30%. After few research i find a option under Throughput Controller section ...
- 890
1
vote
1
answer
902
views
Record script using JMeter proxy from command line
I have one requirement:
I need to execute a command in command prompt that should trigger “Start” button of “HTTP(S) Test Script Recorder”. Even if I don't press “Start” button, the HTTP response ...
- 11
1
vote
2
answers
817
views
Compare web content with the CSV File
I want to compare my data in CSV with the web content. The data in CSV file comprises of multiple rows and column. How can I verify that the data inputted on the web is correct comparing it with the ...
0
votes
2
answers
6k
views
parametrization of body jmeter
I just started using Jmeter and don't know how to make a variable. This is the HTTP body request and I would like to change the project name each time I perform load testing.
I tried using CSV config ...
0
votes
1
answer
27
views
SoapUI Load Testing - Define a Curve to Test On
I am trying to run a test with 11 steps, and I want to define a curve of how frequently tests will be sent. That is, I want to start off with one request per second, then graduate that until I hit a ...
0
votes
1
answer
476
views
Keep getting 403 error code when executing POST request via Jmeter
keep getting error code 403 when executing POST request to Upload file. The system is using oauth2 authorization. i'm able to execute login, navigate to page but keep failing and getting 403 when ...
- 1
0
votes
0
answers
86
views
Unable to do Load Runner Scripting for .Net Desktop application
I need to test a .Net windows application using LoadRunner 12.53.
Tried couple of methods but no success.
Method1:
Used .Net protocol and clicked start recording
Error: Start Recording Failed. No ...
0
votes
1
answer
149
views
Perfoming perfomance testing on frontend for Angular web application
I am in need of performing frontend load test for AngularJS application. Is there any way to perform it?
Also, note it cannot be done in JMeter.
0
votes
1
answer
387
views
Jmeter: How to get combined thread count from multiple jmeter slaves
I am using jmeter distributed environment and distributing load on multiple slave machine. I am running jmeter -g <csv file> -o <output folder> command to get html report from output csv ...
0
votes
1
answer
2k
views
JMeter - Header manager alters the headers during test
I have extracted the jwt token from the User login controller through my http service my test plan looks like this:
As seen in the images in login request it takes the header of Breakdown ...
- 43
0
votes
0
answers
148
views
On webhook related load testing
I was curious if anyone has done or looked into webhook load testing, where you’re testing the service that’s sending webhook events out to a server that’s receiving the webhook notifications, and ...
- 143
0
votes
0
answers
96
views
Java/JNA desktop Application Testing
I am a web developer, so I know what kind of tests need to run on web application before sending it to production. First time I have developed a service for desktop application.
That newly developed ...
- 101
0
votes
0
answers
156
views
Why Junit parser failed when running Jmeter scripts with Bamboo?
*
Please note that this is working fine in my local machine jmeter, only
issue happening when running with bamboo
*
Bamboo Script configuration
sh /apps/jmeter/apache-jmeter-5.1/bin/jmeter \
-...
- 567
0
votes
2
answers
2k
views
How to Run more than 1 Query through JMeter to do load testing
I got a job to do load testing on database. The problem is I have 3 queries that need to run one after another to get the result as below sequence.
UPDATE db_swim_dev.ios_upgrade_css_site_selection ...
0
votes
1
answer
2k
views
Can JMeter JDBC pre-processor accept multiple Insert queries?
I'm creating a Thread Group, and before sample execution want to seed the database with test data. According to the JMeter manual, I need JDBC pre-processor.
I insert multiple insert queries into the ...
0
votes
1
answer
408
views
Login with different Login ID's for native mobile application using JMeter
I know for different parameters I have to use a CSV DatasetConfig and create a .csv file, with the email id and password separated by a comma.
For native mobile apps, we are using HTTPS Test Script ...
-1
votes
1
answer
216
views
Simulate the real World load runner scenario in Jmeter using stepping thread group
My client wants to simulate the Loadrunner scenario in Jmeter using the stepping thread group
I have simulated the load in Jmeter with these parameters
. It is pulling wrong results can i know how ...
-1
votes
1
answer
96
views
Any Load Testing Tool suggestion for the tests consists of Node.js using Selenium Web driver?
We have a number of web pages that support and have a matching set of automated tests for those pages. Each test consists of node.js, using selenium web driver, and generally, we target a Chrome ...
- 1
-1
votes
2
answers
968
views
I have swagger URL to TEST IN jmeter but not getting proper response
I have swagger URL to test in JMeter: http://192.168.1.185:9100/swagger-ui.html#/bd-config-controller/getUsingGET
when I break this URL into IP:192.168.1.185
port:9100
...
- 43
-1
votes
2
answers
1k
views
How to use regular expression for Cookies in jmeter
I am missing something, now sure how to pass the Cookies if its expecting.
- 41
-1
votes
1
answer
40
views
J meter Record and Playback
My question is how should I test a transactions using HTTPS record and controller.I have recorded one transaction,while running the playback option in jmeter the responses getting logged twice for ...
- 19
-1
votes
2
answers
93
views
How can we pass payment Id from response to request using Regular expression extractor in jmeter?
here I am trying to pass payment id from request to response
- 1
-1
votes
2
answers
352
views
Calculated no of request per second from concurrent user?
Say I have 100 concurrent users at any point of time in system. Now I want to measure the throughput of the system. As all 100 users will not
be in action at any point of time as there will be some ...
- 107
-1
votes
1
answer
351
views
How to plan Jmeter test in a Website were multiple tabs and sub-tabs to match user experience
How do i design my Jmeter Test plan to get desired output for the below load test:
The User experience and load pattern in the live website is in below order and i want to generate the load based on ...
- 49
-1
votes
2
answers
2k
views
How to generate number of threads(Users) randomly in Jmeter?
I have tried to generate random thread in this way but it is not working.
-1
votes
1
answer
402
views
What are the major changes/features in JMeter 4.0? How to upgrade to version 4.0?
JMeter has come up with version 4.0, again this is a major release! Apparently the UX has changed but what are other important changes or features. With the release of 3.0 JMeter came up with the ...
- 917