Questions tagged [performance]
Performance testing is a subset of performance engineering, an emerging computer science practice which strives to build performance into the implementation, design and architecture of a system.
0
votes
1answer
14 views
Html file is not generated in JMeter report in non GUI mode
I run my test plan in non GUI mode and it executed successfully, however it was only the csv report that got generated while the html report wasn't generated in the specified folder. this is my folder ...
4
votes
3answers
422 views
Estimation of maximum no of concurrent users a application will need to support
I need to estimate the maximum number of concurrent users my application will experience in order to set goals for the software development team.
We have 550 potential users, but modelling of the ...
0
votes
2answers
40 views
Setting the Benchmark for performance Test
I have a task to set a performance benchmark using stat given by google analytics.
Google Analytics stats:
My Research:-
What I did was Since daily user count is 122154 I set benchmark as follows:
...
2
votes
2answers
54 views
Test the performance of a grid when loading 600,000 records using JMeter
We have an application where we load data from the database to a grid view so users can view the records.
Usually 100,000 to 600,000 records will be loaded in this grid, with 600,000 as the maximum. ...
0
votes
1answer
35 views
Why are api requests not getting throttled when simulated via JMeter?
I have a get api that gives data pertaining to a store based on the storeid passed in the api endpoint. The implementation is such that if more than 50 hits in a second, the api is throttled and a ...
0
votes
0answers
18 views
Looking for an ANTS Performance Profiler Alternative
I'm currently using the ANTS performance profiler to test the performance of an application that I'm working on. One part of the system is supposed to be sending a getStatus() message to another part ...
0
votes
1answer
32 views
Error Rate of Jmeter Execution Report
I execute jmeter script via Blazemeter and I got 2% error. Is it a acceptable rate?
In detail report I observed 1353 request are failed. I just run the script for one user. In that case non of the ...
0
votes
2answers
49 views
Performance test using Jmeter - Tune the Script as per requirement
I have to do performance test on our API. In our current system they told 3500 request are handling per minute. But there is no way to take the amount of concurrent users per minute. So I just run my ...
0
votes
1answer
60 views
Difference between JMeter - HTML Dashboard Report(Response Times Over Time) and Response Times Over Time Listener
I have observed difference between JMeter - HTML Dashboard Report(Response Times Over Time) and Response Times Over Time Listener. I am using JMeter version 3.3 HTML Dashboard Report shows Peak value ...
0
votes
1answer
65 views
How to add Dependent request filter as load test plugin in VSTS?
Tool: VSTS
I have around 10 web-tests under a single load test. I have written web-test plug-in that will remove 404 Not found errors for dependent requests (such as gif files). I have added the web-...
0
votes
1answer
81 views
Extrapolating performance test results from scaled down environment
If I am running my performance tests in test environment that has 50% of hardware we have in production, can I somehow extrapolate results from test environments to production? What are possible ...
-1
votes
2answers
138 views
I need to capture all the dynamic values between the two slash symbol(i.e t-e-s-t-q-a) and replace the (-) symbol with empty space (i.e. t e s t q a)
need to capture dynamic values and replace with empty spaces replace the (-) symbol with empty space (i.e. t e s t q a).
Reference image
0
votes
1answer
57 views
Web page performance issue
At the moment im testing a web page which contain 45 youtube videos in a one singlr page.
And client is asking me to do a performance test and i did.
This is what i get as a 1 suggestions from the ...
3
votes
1answer
157 views
How can I generate dashboard from two csv files in Jmeter
I am trying to generate a single dashboard from two CSV files. These two CSV files are generated from two different runs.
This is what I tried so far.
Merge the contents of two CSV files and prepare ...
0
votes
1answer
76 views
Performance issue - Robot Framework vs Python
I am currently working on the development of a keyword that allows to separate the contents of a text file into 2 parts and create 2 new files containing each of these 2 parts.
The file format is ...
1
vote
0answers
48 views
Future-proofing Performance Test Scripts across environments for Continuous Integration - using LoadRunner and Jenkins
Here is the AUT workflow across environments:
Code moves (and gets stable) from dev > QA > Stage > Prod
Data moves (and gets dirtied) from Prod > Stage > QA > dev
We have ...
1
vote
0answers
34 views
Difference between RUM and UEM in Dynatrace
I am New to this APM tool Dynatrace and was analyzing various offering of Dynatrace.
Can anyone please let tell me difference between Real User Monitoring (RUM) and User Experience Management (UEM) in ...
0
votes
2answers
190 views
JMeter + Maven: how to send test result data to InfluxDB?
I use have JMeter tests run by jmeter-maven-plugin.
I’d like to send my test results data to InfluxDB (in order to visualize results in Grafana).
How can I do that? Do I need to set that in my POM ...
3
votes
0answers
146 views
HTTP request having an Edit action is giving an unauthorized error in JMeter Script
I recorded my scripts using JMeter proxy recorder. The JMeter scripts ran perfectly after I configured the Header Manager and the Authorization Manager. All the HTTP requests were responded perfectly. ...
7
votes
1answer
448 views
IEEE 730 standard - Why was “non-functional” term deprecated when applied to requirements?
I am reading the "Software Quality Assurance" eBook by Claude Y. Laporte, Alain April, Leo R. Best, Morris Hein, and Scott Pattison that was published on 22-DEC-2017 by IEEE Computer Society Press.
...
5
votes
1answer
72 views
Azure VM for comparative performance testing
Is it acceptable to use Azure VMs for comparing performance of an application over different Windows OS's?
I've heard that testing in a VM can give squiffy results as the hypervisor tries to juggle ...
2
votes
1answer
140 views
What does mean the fields- domain, realm and mechanism in the Authorization Manager of JMeter?
I am trying to test a website using Jmeter. I recorded the script using the blazemeter plugin. While running,it seems that the login is not performed properly. And the all the further scripts fail ...
2
votes
3answers
307 views
Displayed 419 Response code while using BlazeMeter script in JMeter
I have recorded script using the BlazeMeter & Opened into the JMeter(4.0). While Running the Script in "View Results Tree" Result displayed Response code: 419 with "unknown status".
Please ...
0
votes
0answers
85 views
JMeter 4.0 Generating Report
I ran a sample test to generate JMeter report, but I'm not able to get pie diagram in JMeter dashboard. Please suggest me which settings need to be made for me to generate the JMeter Report.
I have ...
0
votes
1answer
548 views
How to send multiple Json data(Bulk API) in single json request in Jmeter
Eg:
1:
[{ "externalKey": "1", "customerDetails": { "address": { "address": "111 Bourke St", "country": "AU", "postcode": "3044", "state": "Victoria", "unitOrBuilding": "1" }, "emailAddress":"...
0
votes
1answer
889 views
How to parse Json data which is in the HTTP post request in JMeter
Here is the Json Data:
filterKeys":{"${FilterGroup}":["Phenols"]},"lastFilterGroup":"${FilterGroup}"}
I have to extract phenols from the post request for every filter group this value changes.
0
votes
0answers
32 views
Performance Testing tools for an async multi-point system
The Context
I've been hired to work as a Performance test lead for a big transport company updating its nation-wide, realtime, information system. As with every project, this one is behind schedule ...
2
votes
1answer
272 views
Jmeter Scripting for body data having “Info”
Out site is using lots of angular Js. now when I record script for login it has some 5-6 requests recorded. out of those 3 requests are having endcoded key in body data as below.
{"Info":"V8P+Pq/...
0
votes
1answer
106 views
Hardware capabilities for a Test with Jmeter
I'm preparing a load test on Web Service SOAP. I'm following the best practices of documentation:
For testing how JMeter performs on a given platform, the JavaTest sampler can be used. It does not ...
0
votes
1answer
325 views
While running jmeter for master slave configuration in Non GUI mode, created empty output file
Added same execution script on master and slave
Change the property file of master by adding slave IP address and uncommenting
uncomment this on property file: server.rmi.create=false
Run server ...
0
votes
1answer
193 views
How to get JMX Counter in PerfMon Metrics Collector
I am trying to get JMX monitors graph in Perfmon Metrics collector listener but getting all server metrics like CPU, Memory , network I/O except JMX.
When I am going to apply this counter then getting ...
-1
votes
1answer
269 views
What are the major changes/features in JMeter 4.0? How to upgrade to version 4.0?
JMeter has come up with version 4.0, again this is a major release! Apparently the UX has changed but what are other important changes or features. With the release of 3.0 JMeter came up with the ...
0
votes
1answer
165 views
How to test Ajax URL in JMeter?
Does anyone knows how to test ajax URL in JMeter?
As I m working on performance testing of salesforce application.
When I'm doing ajax URL testing, I got the below server error.
Thread Name: Admin ...
0
votes
1answer
420 views
How to generate HAR file after running a test using Jmeter?
I have created a script in JMeter using Selenium jar and I have written script in WebDriver sample using Java script language .
Script is working fine
//var pkg2 = JavaImporter(net.lightbody.bmp....
0
votes
1answer
41 views
Can JMeter script run application
I've recorded a web script (script is creating a quote for product) using blazemeter, and downloaded the file. After i ran the script from JMeter, for that i got all results in tree, table, etc..
But ...
1
vote
1answer
28 views
How to access a website that is htaccess password secure through JMeter
Is it possible to access a website that is htaccess (Username&password) secured through JMeter?
I am getting authorization error. I am giving username and password with HTTP request but still ...
0
votes
2answers
212 views
JMeter performance testing with the same user performing multiple scenarios
Just consider an admin account:
Using JMeter I can record a script:
goto url -> sign in -> create order
if I create Thread group of 10 this means -> these 10 users will do the same action
...
-1
votes
1answer
252 views
How to make thread groups user share single Foreach control?
How to make thread group users share single Foreach control, for ex. I have 10 user and one foreach controller for 10K (JDBC request) records, I want to process this 10K records by 10 users(Thread ...
0
votes
0answers
64 views
Is there any way to get the LoadRunner Performance Center test result to an email via Jenkins?
Is there any way to get the LoadRunner Performance Center result (Whether test is Pass or Fail) to an email which continuous integrated using Jenkins.
I have configured LoadRunner Performance center ...
-3
votes
1answer
263 views
I'm trying to run my JMeter script but it is not executing as expected [closed]
Basically our test scenario is about adding a party, so whenever we execute the script, every time it should be able to add a new party. But we are unable to see any party created apart from the one ...
-1
votes
1answer
85 views
What to set as measurable goals and performance criteria for a brand new website build/development?
We have given a task to a third party company to develop a website from scratch for us.
What kind of measurable goals can be put in place in order to get quality assurance from the development. ...
-1
votes
1answer
2k views
Handling authentication token in JMeter [closed]
In my current project the application passes an authentication token id after login. So, I have used below.
. to extract the token id from Response Data and i applied the token in .under ...
2
votes
1answer
67 views
JMeter response assertion validation
I have request something similar to the below each using first 3 characters of a name, Ex: WAL.
It results in 3 responses:
<Name>
<firstname>WALLER</firstname>
<firstname>...
0
votes
1answer
1k views
Condition Inside IF controller Not giving proper Result in JMeter
Here I'm facing one problem with if controller.using JSR223 Assertion to Extract the Response in Jmeter like this it is in One Thread Group
def threadName = Thread.currentThread().getName()
...
0
votes
1answer
159 views
How to assign only(200 ) success response to next request in JMeter
here i'm facing one problem.in My JMeter script i am getting some response like this
{"error":"404","error_description":"The underlying provider failed on Open."}
{"error":"404","error_description":"...
0
votes
1answer
146 views
How to Reduce the Number of if controller for better performance of test plan in JMeter
Here I'm using 10 if controller in JMeter to run my requirement in test plan each if controller consisting Get and Post request with csv data here in counter i set like this
Start :1
increment:1
...
0
votes
1answer
1k views
Uncaught Exception java.lang.StackOverflowError. See log file for details. in JMeter3.2 version [closed]
2017-11-20 11:18:29,079 ERROR o.a.j.JMeter: Uncaught exception:
java.lang.StackOverflowError: null
at java.lang.ClassLoader.findLoadedClass(ClassLoader.java:1038) ~[?:1.8.0_144]
at java.lang....
6
votes
1answer
268 views
Performance for WebDriver vs AndroidDriver vs iOSDriver
I initially wrote a few selenium scripts to test my web application. The scripts use RemoteWebDriver call for initialising web driver.
I now wanted to run the same scripts to test the web application ...
1
vote
1answer
347 views
How to store all and multiple response data using setProperty Function in jmeter
Here is the scenario :
20 users with one thread group and 6 driver with other thread group here interlink the thread group with beanshell Assertion with setproperty method so from 20 user is ...
2
votes
1answer
82 views
How to Handle the odd and even number of user in Two Thread Group in jMeter
In JMeter i am using for load Test Uber like application so here in First thread group user login and and he will made one request for ride and in second thread group Drive Login he will accept the ...
