12
votes
Accepted
Jmeter: Recorded test plan file doesn't open in non GUI mode
After a lot of Googling and trial and error I found out that a tag in the JMX file that Blazemeter's Chrome Extension generates was creating a problem.
The JMX file included a <hashTree/> in ...
- 8,923
5
votes
Accepted
How to Use Http Request/JSON extractor(using Jmeter Variable) in Jmeter with Response assertion(using Jmeter Variable)
For example you have the following response:
And you need to extract John from it.
Add JSON Extractor Post Processor
Configure it as follows:
Reference Name: anything meaningful, i.e. name
JSON ...
- 13.4k
4
votes
Accepted
Jmeter: Constant throughput Timer with Ultimate Thread Group
As far as I know, it doesn't matter which type of Thread group you are using with Constant Throughput timer, at the end of the test in the results, you will get your desired Throughput which you ...
- 4,580
4
votes
Accepted
How to validate response assertion with XML elements?
I think XPath Assertion would be a better match for XML data, the relevant XPath expression to check whether sampledUrl node text is equal to http://abc.com/off/paul.html will be:
//sampledUrl/text()=...
- 13.4k
3
votes
How to stop JMeter Thread in case of errors in specific requests (samplers)
If you need to limit this behavior to one request, add a Result Status Action Handler as a child of the request
It's in post processor, then if it fails you can configure what happens, e.g. Stop the ...
- 131
3
votes
Accepted
How to stop JMeter Thread in case of errors in specific requests (samplers)
Add Beanshell PostProcessor as a child of the request which must be successful and put the following code into "Script" area:
if (!prev.isSuccessful()) {
prev.setStopThread(true);
}
where prev ...
- 13.4k
3
votes
Accepted
How can I view the server performance using Jmeter?
It's easy to implement. Please see the How to Monitor Your Server Health & Performance During a JMeter Load Test, which will guide you step by step to measure the server-performance!!!
Hope, this ...
- 453
3
votes
JMeter: How can I keep 1000 or "X" users login requests session alive using JMeter?
Although Constant Throughput Timer accepts value in Requests/min and you are saying that you will use 120/sec, so you will have to provide a value of 7200 in Constant Throughput Timer to achieve 120/...
- 4,580
3
votes
Accepted
How to read Logs In jmeter
You can use listener to understand the Logs.
Please refer below steps
Right click "thread group” add -> listener -> aggregate report
Now select your Access Log Sampler
Enter the IP Address or ...
- 809
3
votes
Accepted
Using Jmeter How to Match values in Json response with JDBC response?
Not knowing the details of JDBC and JSON response it is hard to provide exact configuration, from the high level perspective it should be something like:
Add JSON Extractor and store "interesting" ...
- 13.4k
3
votes
Accepted
JDBC PostProcessor Example in Jmeter for Response assertion
For example, we have the following table:
mysql> describe city;
+-------------+----------+------+-----+---------+----------------+
| Field | Type | Null | Key | Default | Extra |...
- 13.4k
3
votes
Accepted
Jmeter Response assertion failure on image URL matching with DB
You need to tick JMeter Variable radiobutton in order to make this work as you expect
Your current setup is comparing ${imageurl_1} with the parent sampler response.
See documentation on Response ...
- 13.4k
3
votes
What are the units of Y-axis in this perfmon graph in JMeter?
For particular your image Y axis stands for Swap (page) file usage in bytes depending on chosen metric which could be one of:
used
pagein
pageout
free
total
You can calculate percentage for swap ...
- 13.4k
2
votes
Accepted
Am I missing anything professionally in my JMeter plan?
I will your plan is right for most of the things, I am listing down only those things which you need to add/update.
Add Cache Manager
Taking care of Timers: Note that timers are processed before each ...
- 4,580
2
votes
What tools are recommended for end to end page load time testing (including ajax and styling elements)?
If the amount of load is not important and you only want to know which elements in your webpage are consuming more time (from a single client perspective) you could take a look at YSlow. It also gives ...
- 186
2
votes
How can I record a pop-up in JMeter
Your issue is common for SharePoint applications. Actually your application is using Windows Authentication method and JMeter can't record this because Jmeter records only web browser actions. You ...
- 4,580
2
votes
How to read Logs In jmeter
You can configure jmeter to add an header line with the column names by modifying the jmeter.save.saveservice.print_field_names to true in the jmeter.properties file.
By default, the columns are:
...
- 123
2
votes
How can I view the server performance using Jmeter?
If by server performance you mean server's health and resource utilization, then,
There is no built option for monitoring server health in JMeter. But, don't be disheartened, there is a plugin ...
- 8,923
2
votes
Jmeter scripts putting my stage server down
Don't run application under test and JMeter on the same machine to avoid the mutual interference, JMeter load test is quite "heavy" operation itself and in case of hardware resources lack you won't be ...
- 13.4k
2
votes
Accepted
JMeter Webdriver sampler "WaitForText"
I don't know what programming language you use, the below answer assumes default WebDriver Sampler language which is JavaScript.
You should implement your own custom Function like
var wait = new ...
- 13.4k
2
votes
How to use two user defined variables for same thread group?
In the top level User defined Variables config element declare 1 variable server and assign it a value like ${__P(server,test-server-name)} and when you run your test from command line you can pass ...
- 121
2
votes
Accepted
Multiple response assertions and Xpath assertions not working
I believe it would be a lot easier to use 4 separate assertions like:
Combining several clauses into single assertion is also possible, for example:
there are | and and XPath operators
there is | ...
- 13.4k
2
votes
Accepted
How can I Use JDBC Request/Debug Sampler results match with HTTP Response in JMeter?
General recommendation: there are Variable names and Result variable name fields under JDBC Request sampler:
Using them you can get "interesting" parts of the JDBC response (or whole response) stored ...
- 13.4k
2
votes
Accepted
How to get API response XML values in to variables in Jmeter tool for matching purpose with DB?
Extract the value from XML using XPath Extractor, the relevant XPath query would be something like //Product/Id/text()
Once done you will be able to compare 2 JMeter Variables:
the one from the ...
- 13.4k
2
votes
How to fix Jmeter Assertion Failure when element is not passing in response
If you need to check that your ${OfferSubTitle} JMeter Variable value equals to Not Found (in other words, how to make your current assertion not to fail) you need to use the following Response ...
- 13.4k
2
votes
How to use the Blazemeter Step-by-step debugger?
You can move to debugging your script in following way:
Step 1 : Create the script as per your business requirement. Here i have created one sample test plan for the reference where i have setup all ...
- 1,573
2
votes
How to use the Blazemeter Step-by-step debugger?
Given successful installation you should be able to see Step-by-Step Debugger entry under "Run" section of JMeter's main menu:
On start you will see debugger window where you will be able to inspect ...
- 13.4k
2
votes
Accepted
How to couple JMeter with Jenkins?
JMeter startup script checks for Java version using Findstr program. On "normal" Windows installation the Findstr program should exist in C:\Windows\System32 directory therefore it should be on your ...
- 13.4k
2
votes
Accepted
How to store all and multiple response data using setProperty Function in jmeter
I would recommend switching to JSR223 Assertion and Groovy language as:
Since JMeter 3.1 it is recommended to use JSR223 Test Elements and Groovy for scripting
Groovy has built-in JSON support so ...
- 13.4k
Only top scored, non community-wiki answers of a minimum length are eligible